Posted on Leave a comment

How to repair BMW F18 N52 Engine MSV90 DME BSD failure oil measurement not possible

How to repair BMW F18 N52 Engine MSV90 DME BSD failure oil measurement not possible

BMW N52 Engine MSV90 DME usually report error like oil measure not possible, fault code: CD9304- BSD communication fault.  and the fault code can not be deleted.

First step is to check the cables, exclude to cables failure. measure the BSD data line voltage.  If all the cables in good condition, check the DME.

If confirmed the DME failure, it can be repaired, not very complicated, a chip inside damaged. in this article we will introduce how to repair it

How to repair BMW BSD failure Oil measurement failure
BMW F18 MSV90 DME BSD failure oil measurement failure repair tutorials
BMW F18 N52 MSV90 DME BSD failure oil measurement failure
BMW N52 Engine BSD Failure repair
How to repair BMW BSD Failure
BMW 5 series MSV90 BSD failure
BMW F18 N52 Engine MSV90 BSD failure
BMW F18 N52 Engine MSV90 DME Oil measurement exit work failure repair solution
How to repair BMW N52 Engine MSV90 DME BSD failure
How to repair BMW MSV90 BSD failure
BMW N52 Engine DME MSV90 BSD failure repair solution
BMW N52 Engine MSV90 DME BSD failure repair solution
BMW F18 N52 Engine DME BSD failure repair
How to repair BMW F18 MSV90 DME oil measurement not work failure
BMW BSD failure oil measurement failure repair solution

Better not open this ECU housing, because the glue is very tight, hard to open, drill a small hole on the back of the DME, the postion please refer the picture above, use a small Nozzle hot air gun to remove the chip – TJA1020, Should be very careful, Change a new chip, clean the dust, the seal this hole, this repair work is done.

My WhatsApp: +86 171 5483 5574;

Skype: live:u-obd

E-Mail: service@u-obd.com

Facebook Page

Youtube 

Leave a Reply